1. Common corrugated models

Galvanized corrugated boards usually have the following common corrugated models: YX35-125-750, YX25-205-820, YX25-210-840, YX51-380-760, etc. Among them, "YX" represents the wave shape, "35" or "25" represents the wave height, "125" or "205" represents the wave distance, and "750" or "820" or "840" or "760" represents the effective width.

2. Plate thickness

The thickness of galvanized corrugated board is generally between 0.13-1.2mm. Corrugated boards of different thicknesses can be selected according to different usage environments and loads that need to be withstood.

3. Cross distance

The cross distance refers to the distance between two adjacent corrugations, which generally ranges from tens of centimeters to several meters. It can also be customized according to needs. The greater the intersection distance, the higher the load-bearing capacity and stiffness of the corrugated board, but the corresponding use area will be reduced.

4. Other parameters

In addition to the above three basic parameters, other parameters of galvanized corrugated boards also include length, weight, surface treatment, etc. Corrugated boards of different lengths can be customized according to needs, and the general length does not exceed 12 meters. The weight of corrugated board mainly depends on the thickness and length of the board. It should be noted that the greater the weight of corrugated board, the more difficult it will be to transport and install. In addition, anti-corrosion, waterproofing and other treatments can be carried out on the surface of corrugated board to improve its service life and performance.

To sum up, choosing the appropriate galvanized corrugated board needs to be based on different usage environments and needs. At the same time, parameters such as corrugated model, board thickness, and intersection distance need to be considered to ensure that it has sufficient bearing capacity and stiffness. Before purchasing corrugated boards, you can make price inquiries and comparisons based on actual needs and choose the product with the highest price/performance ratio.